Best Plastic spoon mould Supplier.
The product has been tested with accurate data.
Milk powder spoon mold
Below is compliment from our customer :
" I was just informed by the customer that the Scoop 50ml was tested after delivery in Holland. First results are very good, compliments from customer.
The fitting of the cavity side on the hot half was perfect, dimensions are all correct.
Products look nice, polishing was done good. They need to check product dimensions but they estimate this is not an issue.
customer is happy to hear that also the Lipstick Samplers moulds) are being manufactured at the same toolmaker.
They expect the good quality for these tools as well. And since you take your job in testing and checking the mould
(and also solving the final issues of the powder problem) seriously they are confident of receiving good moulds."
Part /mould information :
Place of Origin: Shenzhen, China
Shaping Mode: Plastic Injection Mould
Product Material: PP
Product Name: Plastic spoon mould
Runner: Hot Runner System
Mould Base: LKM.HASCO.ETC
Mould Life: 100K-1Million Shots
Surface Treatment: Mirror Polish
Lead Time: 25-50 Days
Mould Precision: +/-0.01 mm
Mould Cavity: 1*8 with interchangeable for different versions /spec. of spoons
Supply Ability : 300 Sets of moulds / per Year
Packaging & Delivery
Packaging Details : Vaccum Packed / wooden box,or as your requirement
Port : Shenzhen Port
Checking the gap between the core and stripper plate. This must be measured. Also checking if the ejector plate over the cores that the height is not flush, there should be approx. 0.1 mm difference to make sure there is a gap between stripper plate and core (0.01 mm). When there is a gap there will be no sticking anymore.
Copyright © 2021 Shenzhen Times Precision Plastic Mold Co., Ltd. - All Rights Reserved.